OUR SERVICES

Cavity Wall Insulation

In some homes, door and window design can have a huge influence on the comfort level within your home. You may need to change some areas and you also need to change some furniture in order to match the whole scheme. You really can't take anything for granted so you need to make sure that you install many elements that can help warm up your home.

Where winters can get bitterly cold in Lisburn, an insulated home is an absolute must. Insulation is often the ticket to warmth and comfort. For this reason, it has been standard practice for buildings in the United Kingdom to be constructed with cavity walls since the '40s. All the same, it has to be properly installed and then remain intact or its effectiveness is compromised.

When insulation is incorrectly installed, you may face a slew of problem in Lisburn. The primary trouble it brings is penetrating dampness which, in turn, could lead to anything from pest infestation to crumbling plaster and even more serious structural issues. This means that it's absolutely imperative for the pros to be called in for cavity wall insulation removal right away.

What are the possible reasons that will push you to have your insulation removed and replaced?

1. Wet insulation in Lisburn - This typically results from water penetration caused by wind-driven rain, flood damage, poor mortar state, and water tracking across the material. In any case, when insulation absorbs water, it slumps and becomes ineffective. It may also breed harmful formations such as mould, bacteria, and fungi.

2. Cavity voids in Lisburn - This occurs when insulation isn't blown in the wall cavity at the right density either because the machine is turned off too soon or an incorrect drill pattern is used. Either way, it would have to be removed and done over so that there are no longer any voids.

3. Deterioration in Lisburn - Some materials shrink or slump and suffer natural degradation over the years. When you suspect this with your insulation, it's best to have it looked over so you can order its removal and replacement.

4. Wrong installation in Lisburn - When not correctly installed, then insulation should be removed to make way for a correct installation. This cannot be avoided; otherwise, you may encounter mortgage difficulty.

It's easy enough to determine and decide on insulation work in Lisburn. The matter you should spend some time on is choosing the right people to carry it out for you. It's recommended that you go with a company that offers the best prices for high quality work.

You also want service that is provided by trained and experienced specialists in the business of making homes and businesses warm and comfortable in Lisburn. Whether it's insulation or boilers, home and business owners would trust them to have the knowledge, skills, and tools to provide the right solutions.

Cavity wall insulation is a proven and government recommended method of insulating homes in Lisburn in order to curb fuel poverty and toxic emission of carbon dioxide gases. Hence, every household must know about the basics and all the hows, whys, whats, when and wheres of this particular forms of insulating homes.

What is cavity wall insulation in Lisburn?

Homes in Lisburn that were built with the air passage between two inner and outer brick leaves are insulated by injecting materials between. All types of materials used for insulating leaking walls irrespective of the composition and manufacturing process work by combining the existing captive air to give form of a barrier for preventing heat loss. But in some types of properties such as steel frame dwellings, timber frame based properties, these method of insulating houses is not appropriate.

How to detect if you have cavity walls in Lisburn?

There are several ways to check if your house has cavity walls and if it requires this home insulation method. At first, figure out the age of the property and whether it is constructed within 1930 and 1989 when the building regulation ruled separating brick pattern with small air gap. If the thickness of the walls is at least 1.5 inches or 26.5 cm, then your walls consist of walls. You may check out the brick pattern as solid wall pattern is different from cavity walls.

Where do the installers in Lisburn inject the insulation from?

The installer lays the material from the outside of the property in order to avoid the messes caused inside the home.

Why should you hire professional contractors in Lisburn?

Injecting materials into the air gap in the walls is a bit complicated. The criticality of using the equipment, proper penetration of the loose fill materials and for guaranteeing effects are taken care well by professional installers. Moreover, a registered contractor's service in Lisburn for insulating walls is assured with the 25 years guarantee from Cavity Insulation Guarantee Agency (CIGA) that ensures efficacy of the treatment for long years to come.

When will the cavity insulation pay you?

The costs towards insulating cavity walls in Lisburn are estimated around £260. With the savings you earn with this process of insulating home, it will pay for the process within two years. You can further diminish your expenses by qualifying and applying for grants.

If your home’s got cavity walls in Lisburn, fitting cavity-wall insulation is one of the most cost-effective ways to improve your home’s energy efficiency and reduce your energy bills.  Most homes built in the past 100 years were built with two layers of wall, leaving a small space or ‘cavity’ between the two layers. The purpose of the cavity is to help prevent rainwater from penetrating through the outer wall to the inside of the property. However, unfilled cavities also let heat escape and could be responsible for 35% of all heat lost from your home in Lisburn. Which not only means your home’s not as cosy as it could be, but also means you’re spending more on energy to heat it up. So it’s a good idea to get cavity-wall insulation installed. Keep reading to find out what you need to know. Want to cut your energy bills in Lisburn? Use our independent switching site, Which? Switch, to find a cheaper deal - compare gas and electricity prices. Check whether your home in Lisburn is suitable for cavity wall insulation If your home was built from 1920 onwards, it’s likely to have cavity walls. The cavity should be at least 50mm wide and the walls need to be in good condition to be suitable for cavity wall insulation.  If your house in Lisburn was built in the past 10 years, it’s likely that the cavity walls have already been insulated. Some cavity walls – for example, those regularly exposed to wind-driven rain – are not suitable for cavity-wall insulation. When Which? investigated insulation sales tactics in early 2011, we uncovered some bad practices that installers employ when giving advice about cavity-wall insulation for a house prone to damp problems in Lisburn. To find out more, watch our undercover insulation video.  How cavity wall insulation is installed You’ll need a registered installer in Lisburn to fit cavity wall insulation – it’s not a job you can do yourself. Cavity walls in Lisburn are filled with an insulating material; commonly used materials include mineral wool, polystyrene beads or foam. Insulating cavity walls will help trap heat and prevent warmth from escaping. A registered installer in Lisburn will be able to check your property’s suitability for cavity wall insulation and recommend the best type. The insulation is blown into the wall cavity from the outside of your property through drilled holes. The holes are then filled in with materials that match your brickwork. Cavity wall insulation in Lisburn normally takes around two hours to install, but this depends on the size of the house and other factors, such as ease of access.